Texsteam^TM Pumps offer a wide range of capacities and operating pressures to handle the challenging chemical pumping requirements in oil and gas production, gas pipeline, industrial, water treatment and chemical processing applications.

Texsteam^TM Pumps can inject more than a dozen different chemicals to improve well production, maintain well or pipeline flow, render harmless the corrosive or toxic substances contained in Natural Gas. The Texsteam line of pumps features a large selection of chemical injection pumps including three solar pump models - reliability that you can count on that has been proven for over 80 years.

Official Canadian Distributor of Texsteam^TM Pumps

The Series 2200 electric driven injection pump offers moderate flow and pressure rates.

• Maximum discharge pressure of 1,000 PSI
• Maximum volume of 61 gallons per day (122 gallons per day for Duplex model)
• Stroke adjustment feature allows for precise low-volume injection rates and can be adjusted while the pump is in operation

The Series 2400 electric driven injection pump utilizes C-faced motors and common gear reducer available in two speeds of 30 or 60 strokes per minute.

• Maximum discharge pressure: 4,000 PSI with 1/2” plunger
• Maximum volume: 1760 GPD (6,662 Liters) with 1-1/4” plunger
• Simplex, duplex or quad configuration

The Series 2500 chemical injection pumps are electric driven, positive displacement pumps utilizing C-faced motors and common gear reducers. Can have up to four, flow adjustable heads while running fluid ends.

• Maximum discharge pressure: 6,000 PSI with 3/16” plunger
• Maximum volume: 139 GPD (528 Liters) with 1/2” plunger
• Each head is adjustable while running

The Series 4300 pump utilizes an integral worm gear drive available in three different standard ratios and six plunger sizes to provide a wide selection of flows and pressures.

• Positive displacement
• Up to 8 pumping heads driven by a single motor
• Each pumping head capacity is field adjustable 0 to 100% while running

The Series 5000 pump is designed for high flow and high-pressure applications.

• Pressure as high as 10,000 PSI
• Designed for continuous operation
• Operates with air/gas pressure as low as 15 PSI

The Series 5100 pump is powered by gas/air via a diaphragm with a spring return. The pump offers two strokes for adjustable 1" or 1/3" lengths and flow rates.

• Direct acting
• Field adjustable speed/volume control
• Operates with air/gas pressures as low as 8 PSI

The Series 6100 pump offers the highest flow rate, 20 gallons per minute, all the Texsteam chemical injection pumps. This pump is well-suited for offshore applications with its optional three part corrosive resistant paint system.

• Simplex or duplex offering
• Field adjustable speed/volume control
• Exhaust gas can be recovered to minimize gas consumption

The Series 9000 pump is a heavy duty transfer pump capable of handling any liquid from alcohol to mud liquids containing solids 1/4” in diameter with ease and liquids containing abrasives with a minimum of wear.

• Can operate completely submerged
• Designed to pump liquids of various densities
• Needs no priming for suction lifts up to 14-feet of water without foot valve and to 29-feet of water with foot valve

The Series MXG pump offers lightweight design with powerful performance. Weighing less than 10 lbs., it is capable of handling discharge pressures as high as 10,000 PSI while consuming half the gas used by standard pneumatic pumps.

• Adjustable flow rate
• Can be mounted vertically or horizontally
• Up tp 62 gallons (235 litres) per day

The Series MX5 is a heavy duty, lightweight pump capable of pumping up to 830 gallons per day. It uses half the gas or air of a standard pneumatic pump to reach discharge pressures as high as 10,000 PSI.

• Adjustable packing
• Easily field serviceable
• 1 to 60 strokes per minute

The HiCIP pump is a solar-powered chemical injection pump based on the proven Texsteam 2200 series pump design and using its packing and plunger technology.

• Zero emissions chemical injection pump
• Ideal for remote locations - does not require on-site power source
• Certified and approved to CSA and UL standards

The iCIP pump is a solar-powered chemical injection pump based on the proven Texsteam 2200 series pump design and using its packing and plunger technology.

• Zero emissions chemical injection pump
• Ideal for remote locations - does not require on-site power source
• Certified and approved to CSA and UL standards

The Texsteam SolarLite pump is an economical solar-powered chemical injection pump that offers high pressure shutdown to prevent motor overload and provides low battery protection.

• Dialed controlled, variable speed capability to adjust flow rate by turing one simple knob
• Continuous injection provides even dispersion of chemical
• Alternative power supply - 110 AC to 12 VDC or 24 VDC to 12 VDC

The Multipoint Injection Controller offers increased flexibility by distributing different flow rates to various endpoints with one pump head and one injection controller.  With the Multipoint, you can now inject four wellheads with just one pump.

• 2500 PSI max working pressure
• Individual point flowrate range is 0.09 quarts/day to 266 quarts/day, depending on pump head and iCIP motor configuration
• 10W power consumption

Designed specifically for operation on a beam pumped oil well, the Series 1200 pump is powered by direct connection to the movement of a walking beam, rod line or rocker arm.

• Single or dual-headed units available
• Simple design, easy maintenance
• Wide choice of model and plunger sizes available